ChemBK
  • Home
  • Product Category


ANTIMONY TRISELENIDE

Antimony(Iii) Selenide

CAS: 1315-05-5

Molecular Formula: Sb2Se3

  1. Home
  2. Product Category
  3. Inorganic chemical engineering
  4. inorganic salt
  5. ANTIMONY TRISELENIDE

ANTIMONY TRISELENIDE - Names and Identifiers

Name Antimony(Iii) Selenide
Synonyms ANTIMONY SELENIDE
ANTIMONY TRISELENIDE
diantimony triselenide
Antimony(Iii) Selenide
ANTIMONY (III) SELENIDE
antimonyselenide(sb2se3)
1,3-Distiba-2,4,5-triselenabicyclo[1.1.1]pentane
CAS 1315-05-5
EINECS 215-256-0

ANTIMONY TRISELENIDE - Physico-chemical Properties

Molecular FormulaSb2Se3
Molar Mass480.4
Density5.810
Melting Point611°C
Boling Point1031.9 °C
Water SolubilityVery slightly soluble in water
AppearancePieces
Exposure LimitACGIH: TWA 0.5 mg/m3; TWA 0.2 mg/m3NIOSH: IDLH 50 mg/m3; IDLH 1 mg/m3; TWA 0.5 mg/m3; TWA 0.2 mg/m3
Merck14,712
Storage ConditionRoom Temprature
SensitiveMoisture Sensitive
MDLMFCD00016319

ANTIMONY TRISELENIDE - Risk and Safety

Hazard SymbolsT - Toxic
Toxic
Risk CodesR23/24/25 - Toxic by inhalation, in contact with skin and if swallowed.
R36/37/38 - Irritating to eyes, respiratory system and skin.
Safety DescriptionS26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
UN IDsUN 1549 6.1/PG 3
WGK Germany3
TSCAYes
Hazard Class6.1(b)
Packing GroupIII

ANTIMONY TRISELENIDE - Introduction

exposure limit ACGIH: TWA 0.5 mg/m3; TWA 0.2 mg/m3
NIOSH: IDLH 50 mg/m3; IDLH 1 mg/m3; TWA 0.5 mg/m3; TWA 0.2 mg/m3

Features
Antimony selenide (Sb2Se3) is a binary single-phase compound. Due to its large raw material reserves, low toxicity, low price, suitable band width (~ 1.15eV), large absorption coefficient (>105cm-1), and low crystal growth temperature, it is very suitable for making new low-cost and low-toxic solar cells.

Preparation method
Weigh the reaction raw materials 2mmolSb, 3mmolSe and the flux 10mmolCsCl, and then mix them to obtain the precursor, and fully grind the precursor to make it mix evenly; put the mixed sample into a quartz bottle, and use a vacuum pump unit to vacuum up to 10 ~ 102Pa (also can be protected by inert gas), so as to eliminate the influence of air on the molten salt reaction, and seal the quartz bottle with hydrogen and oxygen flame; the sealed Shi Ying bottle with mixed samples is placed in a common heating furnace, heated from normal temperature to 700 ℃ for 72 hours, then cooled to 450 ℃ to take out the Shi Ying bottle and quickly cooled to room temperature (put into water); Finally, the sample in the Shi Ying bottle is taken out, the flux CsCl is removed by ultrasonic water washing for many times, and then the sample is placed in a drying oven at 80 ℃ for drying for 2 hours to obtain micron-sized Sb2Se3 single crystal particles with crystal luster on the surface, about 55 microns.

Last Update:2024-04-10 22:29:15

ANTIMONY TRISELENIDE - Reference Information

characteristics antimony selenide (Sb2Se3) is a binary single-phase compound. due to its large raw material reserve, low toxicity, low price, suitable band width (~ 1.15eV), large absorption coefficient (>105cm-1), and low crystal growth temperature, it is very suitable for making new low-cost and low-toxic solar cells.
preparation method weigh the reaction raw materials 2mmolSb, 3mmolSe and flux 10mmolCsCl, mix them to obtain the precursor, and fully grind the precursor to make it mix evenly; Put the mixed sample into a Shi Ying bottle, the vacuum pump unit is used to vacuum up to 10 ~ 102Pa (inert gas can also be used to protect), so as to eliminate the influence of air on the molten salt reaction, and the Shi Ying bottle is sealed with hydrogen and oxygen flame; the sealed Shi Ying bottle with mixed samples is placed in a common heating furnace and heated from normal temperature to 700 ℃ for 72h, then cooled to 450 ℃ to take out the Shi Ying bottle and quickly cooled to room temperature (put into water); finally, the sample in the Shi Ying bottle was taken out, and the flux CsCl was removed by ultrasonic water washing for many times. After that, the sample was placed in a drying oven at 80 ℃ for 2 hours to obtain micron-sized Sb2Se3 single crystal particles with crystal luster on the surface, about 55 microns.
EPA chemical information information provided by: ofmpub.epa.gov (external link)
Last Update:2024-04-10 22:29:15
ANTIMONY TRISELENIDE
Supplier List
Shanghai Macklin Biochemical Co., Ltd
Featured ProductsSpot supply
Product Name: Antimony selenide Visit Supplier Webpage Request for quotation
CAS: 1315-05-5
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328 Click to send a QQ message
WhatsApp: +86-18821248368
SKYRUN INDUSTRIAL CO.,LTD
Spot supply
Product Name: Antimony(III) selenide Visit Supplier Webpage Request for quotation
CAS: 1315-05-5
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185 Click to send a QQ messageSend QQ message
Wechat: chinaskyrun
SHANGHAI ACMEC BIOCHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: Antimony(III) selenide 99.99% trace metals basis Visit Supplier Webpage Request for quotation
CAS: 1315-05-5
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922 Click to send a QQ message
Wechat: 18621343501
WhatsApp: +86-18621343501
Shanghai Yuanye Bio-Technology Co., Ltd.
Product Name: Antimony(Iii) Selenide Visit Supplier Webpage Request for quotation
CAS: 1315-05-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409 Click to send a QQ message
Shanghai Macklin Biochemical Co., Ltd
Featured ProductsSpot supply
Product Name: Antimony selenide Visit Supplier Webpage Request for quotation
CAS: 1315-05-5
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328 Click to send a QQ message
WhatsApp: +86-18821248368
SKYRUN INDUSTRIAL CO.,LTD
Spot supply
Product Name: Antimony(III) selenide Visit Supplier Webpage Request for quotation
CAS: 1315-05-5
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185 Click to send a QQ messageSend QQ message
Wechat: chinaskyrun
SHANGHAI ACMEC BIOCHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: Antimony(III) selenide 99.99% trace metals basis Visit Supplier Webpage Request for quotation
CAS: 1315-05-5
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922 Click to send a QQ message
Wechat: 18621343501
WhatsApp: +86-18621343501
Shanghai Yuanye Bio-Technology Co., Ltd.
Product Name: Antimony(Iii) Selenide Visit Supplier Webpage Request for quotation
CAS: 1315-05-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409 Click to send a QQ message
View History
ANTIMONY TRISELENIDE
一氧化氮合成 酶(NOS)活性检测试剂盒 可见分光光度法
2-[(4-氯-2-硝基苯基)硫烷基]乙酸
1-Formyl-1-cyclopentene
[1-13C]-三-邻-乙酰基-D-已烯糖
咪达唑仑杂质4
2-(4-硝基苯基)恶唑-4-羧酸
4-氟-3-甲酰基苯硼酸 (含有数量不等的酸酐)
3-氨基苯甲酸乙酯甲基磺酸盐
5-FORMYLPYRIDIN-2-YL-2-BORONIC ACID
  • Home
  • Product Category

© 2015, 2023 ChemBK.com All Rights Reserved | Build: 20230617001